Sustainable Waste Management Of Polyethylene Terephthalate (PET) And Rubber Crumb In Concrete
Several recent studies have been conducted to investigate the possibility of waste materials in construction
building especially Polyethylene Terephthalate (PET) and rubber crumb. From the studies, there is a wide range of possible
civil engineering applications for these waste materials. In this context, this research was conducted to provide more data on
the combination of both waste materials to be used as partial replacement in concrete. The performances of the concretes
were assessed through its compressive strength, water absorption and skid resistance. The fine aggregate was replaced by
PET and rubber crumb at 10%, 20% and 30% by weight of binder and tested for 7, 28, 60 and 90 days of curing. The results
showed that by increasing the replacement of PET in higher proportion (up to 20%) and rubber crumb (up to 10%) the
compressive strength of concretes decreasing. While, the water absorption of concretes increased with the increased of PET
and rubber crumb replacement. For skid resistance, RC concrete were higher compared to control, rubberized-PET and PET
concretes. The main findings of this investigation revealed that these waste materials could be used successfully as partial
replacement for fine aggregates in concrete production.
Keywords- Polyethylene Terephthalate, Rubber Crumb, Waste Materials, Partial Replacement, Fine Aggregate.