Paper Title :Design, Analysis And Optimization Of Connecting Rod Using Ansys
Author :Vaibhav V. Mukkawar, Abhijit P. Kadam, Abhijitn. Ingole, Mangeshd. Chopade
Article Citation :Vaibhav V. Mukkawar ,Abhijit P. Kadam ,Abhijitn. Ingole ,Mangeshd. Chopade ,
(2015 ) " Design, Analysis And Optimization Of Connecting Rod Using Ansys " ,
International Journal of Advances in Mechanical and Civil Engineering (IJAMCE) ,
pp. 38-41,
Volume-2, Issue-2
Abstract : Connecting rod is the intermediate link between the piston and the crank. And is responsible to transmit the push
and pull from the piston pin to crank pin, thus converting the reciprocating motion of the piston to rotary motion of the
crank. Generally connecting rods are manufactured using carbon steel and in recent days aluminium alloys are finding its
application in connecting rod. In this work connecting rod is replaced by aluminium based composite material reinforced
with silicon carbide and fly ash. And it also describes the modeling and analysis of connecting rod. FEA analysis was carried
out by considering two materials of connecting rod for 220cc engine. The parameters like von misses stress and
displacement were obtained from ANSYS software. Compared to the former material the new material foundto have less
weight and better stiffness. It resulted in reduction of 17.33% of weight.
Keywords- Connecting Rod, ANSYS, Composite, Silicon Carbide, Fly Ash, Analysis
Type : Research paper
Published : Volume-2, Issue-2
DOIONLINE NO - IJAMCE-IRAJ-DOIONLINE-1938
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 103 |
| |
Published on 2015-04-20 |
|