Paper Title :Optimization Of Artificial Sand In Concrete
Author :Pradip S. Ingale, Neelam S. Kawade, Ayodhya V. Jadhav, Bhagayshri B. Pawal, Ganesh G. Pradhan, Dinesh W. Gawatre
Article Citation :Pradip S. Ingale ,Neelam S. Kawade ,Ayodhya V. Jadhav ,Bhagayshri B. Pawal ,Ganesh G. Pradhan ,Dinesh W. Gawatre ,
(2016 ) " Optimization Of Artificial Sand In Concrete " ,
International Journal of Advances in Mechanical and Civil Engineering (IJAMCE) ,
pp. 68-70,
Volume-3,Issue-3
Abstract : Artificial sand is most commonly use in the construction because of the problem of shortage of river sand. The
replacement of artificial sand proves economical in the construction and it is the best substitute for natural sand. But it is
found that maximum replacement of artificial sand causes some structural problems (i.e. crack, workability, permeability)
because of its properties. Artificial sand does not fulfil the few properties of natural sand so that we decided to replace
optimum percent of artificial sand with natural sand. As per the experimental study the replacement of 65-70% of artificial
sand gives excellent results as compressive strength, flexural strength and split tensile strength. Mix design has been done
for M25 grade concrete using design approach IS for the conventional concrete. Test were conducted and compared with
natural sand. It is found that compressive and flexural strength of artificial sand is more than natural sand. So, replacement of
natural sand gives a proper solution over scarcity of natural sand and also helps in making eco-balance.
Keywords— Artificial Sand, Natural Sand, Compressive Strength, Concrete, Properties, Environmental Protection.
Type : Research paper
Published : Volume-3,Issue-3
DOIONLINE NO - IJAMCE-IRAJ-DOIONLINE-4880
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 57 |
| |
Published on 2016-07-18 |
|