International Journal of Advances in Mechanical and Civil Engineering (IJAMCE)
current issues
Volume-6,Issue-2  ( Apr, 2019 )
Statistics report
Jul. 2019
Submitted Papers : 80
Accepted Papers : 10
Rejected Papers : 70
Acc. Perc : 12%
Issue Published : 29
Paper Published : 780
No. of Authors : 2094
  Journal Paper


Paper Title :
Indentation and Fe Analysis For Characterization of Mechanical Properties in Sm520 Steel Weld Zone

Author :Thai-Hoan Pham, Ngoc-Vinh Nguyen, Viet-Hung Truong, Quang-Viet Vu, Viet-Linh Tran, Seung-Eock Kim

Article Citation :Thai-Hoan Pham ,Ngoc-Vinh Nguyen ,Viet-Hung Truong ,Quang-Viet Vu ,Viet-Linh Tran ,Seung-Eock Kim , (2017 ) " Indentation and Fe Analysis For Characterization of Mechanical Properties in Sm520 Steel Weld Zone " , International Journal of Advances in Mechanical and Civil Engineering (IJAMCE) , pp. 26-30, Volume-4,Issue-2

Abstract : Mechanical properties in the weld zone of a popular structural steel SM520 were characterized using indentation and finite element (FE) analysis. Indentation tests were performed across the weld zone including portions of weld metal (WM), base metal (BM), and heat-affected zone (HAZ). Hardness (H), elastic modulus (E), yield strength ( y ), and strain hardening exponent (n) were extracted from indentation load-depth curve with the aid of FE analysis. The results showed that H, E,  y , and n values in the HAZ decrease in the direction from WM to BM region, the average values of H, E,  y , and n in HAZ are highest, whereas WM has a lower E but a higher H,  y , and n than does BM. Keywords - Indentation; Mechanical properties; SM520 steel; Weld Zone.

Type : Research paper


Copyright: © Institute of Research and Journals


Author - Thai-Hoan Pham, Ngoc-Vinh Nguyen, Viet-Hung Truong, Quang-Viet Vu, Viet-Linh Tran, Seung-Eock Kim

| PDF |
Viewed - 45
| Published on 2017-06-13
   
   
IRAJ Other Journals
IJAMCE updates
IJAMCE vol-6, Iss-3(June, 2019)
The Conference World

JOURNAL SUPPORTED BY